Trucks Metal Linked
Trucks Metal Linked
Trucks Metal Linked
Trucks Metal Linked

Trucks Metal Linked

(Inc. 20% VAT)
(£6.25 Exc. VAT)
Earn 7 Loyalty Points

These are sold in sets of 10 / 20  / 30 / 40, Use the drop down menu to select the quantity you want.

These trucks/carriers are for the cord and chain rails. The inner tilt-rod for these trucks must be three-pronged.

If you have a left draw blind, you will need LEFT handed trucks and if you have a right draw blind you will need RIGHT handed trucks. Split draws use half left handed trucks and half right handed trucks.

Also if you have 89mm (3.5") slats you will need 89mm(3.5") trucks and if you have 5" (127mm) slats you will need 5" (127mm) trucks.  5" (127)mm trucks have longer tails than the 3.5" (89mm) trucks

The trucks come in batches of 10, so you can cut the tails to reduce the number of trucks you need or you can join them together to make a greater number. If you have say 24 left handed trucks on your blind, you will need to buy 30 LEFT handed trucks. They will come in 10's so join the three tens together by the tails, then cut off the the front 6 trucks (they can be used on another blind)

Make a note or draw a picture (or take photos) of how your blind is corded, otherwise you will forget

Split draw rails are harder to make than left or right draw blinds

You can change the draw of your blind by buying the trucks you need and buying the correct side control ends.

For example - you have a split blind with Left controls, you could change your blind to a right draw with right controls by buying right handed trucks and a right handed control set. So you can choose which side you have your controls and which way you want your slats to open.

Always replace all the trucks, if you try and replace just one truck you might find that our trucks do NOT fit with your own trucks and if you do replace just one truck the others on the blind will probably break very soon. So you will land up remaking your blind again.

You might also need to use our control ends, spacer bars, operating chain, cord, washers etc.

Reviews (0)

Be the first to Write a Review for this item!

Type of Blind
Vertical Blind
Type of Part
Rail Part
Vertical Blind Track Width
28/30mm Narrow/Slimline