HomeAll Roller BlindsMade to measure Roller blindsDim out Roller blinds

Roller Blind in Plain Dark Beige fabric

Product code:
Made to Measure blind in Plain fabric, straight edge finish, no braid.

Please note the photos are for illustration purposes only as screen colour/definition varies, if you would like us to send some free fabric samples please contact us. How to measure for your roller blinds - 

First decide whether you want to fit the blind inside or outside the window recess.
NB Always take measurements with a metal tape measure, take 3 measurements, and give us the smallest width and drop measurements.

To fit INSIDE THE RECESS please measure the overall width of the window at the top, middle and bottom of the window recess, looking carefully for any obstructions such as a dado rail etc.  Use the smallest width.  Then measure the height of the window at the left, centre and right, again use the the smallest drop measurement.  Tell us these two sizes and that they are for RECESS fit, we will then make the necessary adjustments so that your blind fits snugly inside the window.

To fit OUTSIDE the recess please decide the height at which you will fit the blind, we recommend you allow at least 2" (50mm) for fabric overlap on each side and below the window.  Decide the width and drop of the fabric you require and tell us that it is EXACT FABRIC WIDTH, please note that the ends and brackets of the blinds will extend an extra 35mm wider than the fabric itself.  

Alternatively, if you know the position at which the brackets must be fitted, you can give us this width and tell us it is the EXACT BLIND WIDTH (nb the fabric width will be approx 35mm smaller)

For most roller blinds the maximum length we can make the chain controls will be 1 metre (39"), the length of the cord/chain controls will be 1000mm or 100mm less than the overall drop of the blind WHICHEVER IS THE SMALLER.  If you require controls to be longer than this please contact us before ordering to check that the required length will comply with strict child safety legislation.

Controls can NOT be made longer unless the blind is to be fitted at a height of over 2.5m - if this is the case,or you have any queries please contact us before ordering for advice.

The blinds will come with a side-winder control chain which can be positioned on the left or the light, please choose the correct option from the 'Controls side' box below.  The sidewinder chain must be secured with the chain tensioner safety device which will be supplied with the blind.  

Delivery is 5-7 working days. Delivery cost is £12.00 per order to mainland England, Wales and Lowlands of Scotland. Other places please contact us for a delivery price.
Write a review and share your thoughts with other shoppers.
Product Code
Condition New