Pack of 100 Clear Safety Chain Connectors/Breakaway Devices

(Inc. 20% VAT)
(£29.17 Exc. VAT)
Earn 35 Loyalty Points
In stock

Pack of 100 safety breakaway devices

Enough for 100 blinds.

A Copy of the Safety Certificate is available upon request.

This safety device should be used to eliminate the potential strangulation hazard created looped pull chain for Roller, Roman and Vertical Blinds. It is to be used with ball chains with a diameter of 4.5m. No. 10 chain.

The Chain Breakaway Connector is made of two pieces which are fitted to an operating ball chain and pull apart when under pressure.  

If using on a Roman blind this will be suitable for Headrails fitted with 1:1 and 1:2 chain mechanism only.

Please see the video for how to use & read the most up to date advice which can be found on the safety tab above.

1. Cut a length of chain to double the desired chain drop and connect each end of the chain to the breakaway device. Ensure that the bottom of the chain is going to be no less than 600mm from the floor.

2. Clip the two parts of the safety chain device together.

3. Fit the chain to the blind, positioning the breakaway device just below the chain mechanism.

4. Test the blind to check the chain break will not be obstructed by the chain mechanism. If required, adjust the chain so that the breakaway device doesn't hit the chain mechanism.
Children can be strangled if this device is not installed.
Always use this device to keep cords or chains out of the reach of children.

Reviews (0)

Be the first to Write a Review for this item!

Child Safety
Type of Blind
Type of Part
Safety Device