The Chain Breakaway Connector is made of two pieces which are fitted to an operating ball chain and pull apart when under pressure.
Suitable for Roman Blind Headrail fitted with 1:1 and 1:2 chain mechanism only.
1. Cut a length of chain to double the desired chain drop and connect each end of the chain to the breakaway device. Ensure that the bottom of the chain is going to be no less than 600mm from the floor.
2. Clip the two parts of the safety chain device together.
3. Fit the chain to the blind, positioning the breakaway device just below the chain mechanism.
4. Test the blind to check the chain break will not be obstructed by the chain mechanism. If required, adjust the chain so that the breakaway device doesn't hit the chain mechanism.
Always use this device to keep cords or chains out of the reach of children.