Replacement Control End Set/Winder/Clutch only for Roller Blinds (40mm diameter tube system)
NB size refers to the external diameter of the metal roller tube
Genuine Louvolite.
Made in The U.K.
SMOOTH OPERATION CAN BE LEFT OR RIGHT HAND CONTROL.
A set of control and idle ends to fit 40mm (external) diameter tube.
You will receive 1 x control end (pulley) and 1 x idle end (sprung pin)
Set does not include - fitting brackets, safety device or screws
Control chain can be added to the order as an option
To open the control end to insert the chain please follow the instructions below -
1) Squeeze end pegs to 'pop' open end
2) Place chain over exposed cog
3) Squeeze closed
FOR 40MM EXTERNAL DIAMETER TUBE ONLY(37-38mm inside)
All continuous chains must be secured using a chain tensioning device which must be fixed to a wall at least 1.5m above the floor.
To calculate maximum allowable chain length to comply with new safety regulations:
Max drop of chain = (Height of rail from floor in cm - 150cm)
MUST BE FITTED WITH A SAFETY DEVICE
